HOW TO?
Instructions For Applying Iron-On Transfers
*REMOVE THE SPARES STONES FROM YOUR DESIGN
*ALWAYS IRON ON A HARD, FLAT SURFACE
1. Remove backing paper and check your design to make sure that the rhinestones have not moved during transit, Use tweezers to reposition rhinestones if need be.
2. Position the design onto your chosen garment,
The sticky-side of the transfer paper facing down onto the fabric.
If you need to reposition, Simply lift and reposition.
3. Set the iron to the heat setting that is suitable for your garment. NO STEAM!
Most common setting is high.
4. Gently press the iron onto the design for a minimum of 25-40 seconds.
Applying heat evenly over the design.
Heavier fabrics such as denim might need more time and light fabrics such as thin cotton
will need less time and heat.
5. Allow to cool until warm and then slowly remove the transfer paper.
Your design will stay put if the heat was applied properly.
CONGRATULATIONS!
Your project is now complete!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Thankyou for shopping with
Diamantes R Us
